JASPER® remanufactured Cummins 6.7 Fuel and Air Components are built to exact requirements in order to meet or exceed OEM measured standards and have a nationwide, transferable parts and labor warranty.

JASPER remanufactured Cummins 6.7L Fuel and Air Components are your best option for replacement! Here’s why...

Cummins 6.7L Holset Front Gear Turbo

100% NEW bearings and seals.
100% tested speed sensors.
Plug and play setup.
JASPER® 100% installs a cleaning port in the Cummins 6.7L turbo. This allows periodic cleaning of the turbine housing and nozzle ring to prevent soot build up and increase longevity.
100% installation of stainless steel cup plugs prevent corrosion and leaking.
Actuators are remanufactured and calibrated for optimal performance and function of the VGT mechanism.
JASPER performs component balancing to ensure the highest quality product. Turbine shafts are balanced, both individually and with the compressor wheel attached, prior to being assembled in the housing.
High Speed Core Balancer spins the center section at 70,000 RPM to ensure correct balance, assembly and integrity of rotating assembly at operational speeds.
Turbine shafts and bearing housings are inspected with a profilometer to ensure an RA surface finish of 35 or less to verify a smooth surface and reduce friction.
JASPER uses a bore gauge to ensure proper clearance of oil between the bearing and the bearing housing.

Bosch CP3 High Pressure Fuel Pump

JASPER remanufactures the Cummins 6.7L High Pressure Fuel Pump using 100% OE parts.
100% NEW gaskets and seals are installed.
Remanufactured and calibrated to the latest specifications for performance, longevity and emission compliance.
Tested on a Bosch EPS 815 to ensure proper pressure.

Bosch Injector

Bosch certified.
Remanufactured and calibrated to the latest specifications for performance, longevity, and emission compliance.

JASPER is a service dealer for Bosch products. Check with your Sales Representative to see if these products are available in your area.

Full warranty disclosure is available on our website or upon request. Specifications subject to change without notice.